Windows PC Restarting Unable? You can try these 13 solutions

Windows PC Restarting Unable? You can try these 13 solutions

Are you having problems with your Windows computer’s restart? Are you stuck with a Windows computer that isn’t responding to your commands? You have a few options to troubleshoot the problem.

When system activity, such as Windows Update, interferes with the reboot process, your Windows PC will often get stuck on the “Restarting” screen.

Windows pc stuck restarting? try these 13 fixes

It’s usually quite easy to repair a Windows computer that is stuck during a restart. Windows computers can sometimes get stuck during a reboot, and this requires some advanced troubleshooting.

Then, try these three fixes first

If your Windows PC keeps on restarting, you can try the following three solutions. Continue reading this guide for more troubleshooting tips and tricks.

1. You can’t wait!

It’s best to wait until Windows restarts itself. If you restart your computer following Windows update, it is possible for there to be long delays on the “Restarting” screen while the operating system finishes the update. Continue with these troubleshooting steps if your computer is still not responding after you have given it 15 minutes or longer.

Try these three fixes first

2. Removing External Devices and Other Peripherals

Sometimes, background processes related to peripherals (such as USB printers and external hard drives) can cause Windows to stop shutting down and restarting.

You might try unplugging any wired devices on your laptop or desktop to see if it makes any difference. Remove the Ethernet cable from the computer that is connected to the internet via Ethernet.

Try these three fixes first

3. Hard Reset Your PC

The next step is to do a complete reset.

Warning: Hard resets can cause Windows to crash or corrupt personal files. This is especially true if Windows was running in the background, such as finalizing an upgrade. Wait at least 15 minutes before you do a hard reset.

You can perform a reset by holding the down key Power For 5-10 seconds, hold down the power button on your laptop or desktop until the screen turns dark. For some laptops, you may need to hold down other buttons in order for the screen to turn off. For the right key combination, refer to the manual or the online documentation.

Try these three fixes first

Optional: If your desktop device uses power cables, it is important to unplug them from the casing of the CPU after you turn off the computer. After waiting for up to 10 second, plug it in again.

Press the following button after the shutdown Power To boot your computer back up, press the button. You might need to wait for Windows to complete any system updates that are still incomplete before you can log in to your desktop.

Windows Recovery Environment can be used to repair a computer stuck restarting

Hard-rebooting a computer stuck on the screen can cause the PC to go into an endless boot cycle, or even result in a deadlock Blue Screen of Death errors (BSOD).. A “Getting Your PC ready” screen is all that remains..

You must enter the following information to continue troubleshooting Windows 10 and 11 computers stuck in a restart loop Microsoft Windows Recovery Environment (WinRE), . You can use a USB flash stick that’s bootable . Troubleshoot > Advanced Options.

Use windows recovery environment to fix a pc stuck restarting

4. Make a Startup Repair

Ask Windows to resolve startup issues that cause the reboot loop. The process is completely automated, meaning you do not have to perform any manual work Startup Repair Option in WinR.

Use windows recovery environment to fix a pc stuck restarting

Reload Windows Recovery Environment if a startup repair does not work. Then, proceed to the next step.

5. Start the System File Examiner and Run the Check Disk Utility

You can use Command Prompt to perform these tasks Run the System File Checker as well the Check Disk Utility . . It fixes any stability problems in the operating system as well as errors that may have occurred on the SSD or hard drive.

Select Command Prompt In WinRE, press the following command and hit Enter Enter Launch the System File Checke:

sfc /scannow /offbootdir=C:\ /offwindir=D:\Windows

Use windows recovery environment to fix a pc stuck restarting

Once the System File Checker has finished scanning your computer for viruses, you can start typing chkdsk D: /R You can use the Check Disk Utility.

6. Remove all new updates

Select Uninstall Updates WinRE allows you the freedom to select from the Remove the Last Quality Update and Remove the Last Feature Update There are options that will allow you to remove the latest quality update or feature. This could cause Windows to become stuck in a restart loop.

Use windows recovery environment to fix a pc stuck restarting

7. Perform a System Restore

If you are a System Restore Set up your computer and select System Restore WinRE, Your PC can be rolled back Imagine a simpler time, when your computer was working flawlessly.

You can use safe mode to fix your stuck restarting computer

Try Safe Mode if your computer keeps restarting. Select “Recovery Environment” from the Windows Recovery Environment Startup Settings > Restart to Start Windows 10 /11 in Safe Mode.

Use safe mode to fix a pc stuck restarting

8. Reset Windows Update

Windows Update can be reset to fix reboot loops that are caused by inadvertent system updates. How to do this:

  1. Press Windows Key + R to open a Run box. Then, type cmd.exe Use the press Ctrl + Shift + Enter To launch an elevated Command Prompt consol.
  2. Type net stop wuauserv Use the press Enter Stop the Windows Update Servic.
  3. The following commands will be used to rename the temporary Windows Update directory:
  • cd %systemroot%
  • ren softwaredistribution sd.old
  • Press Windows + S, Control Panel, Enter.
  • Go to System and Security >> System and Security >> Maintenance.
  • Select Start maintenance Follow all instructions on the screen.
  • Go to the Control Panel by opening it Hardware and Sound > Power Options > Change what the power buttons do.
  • Select Change settings that are currently available.
  • Disable Fast startup (recommended) Choose and Save changes.
  • Right-click the Start button Choose and Device Manager.
  • Click right-click on a device driver (e.g. your video card) and choose Properties.
  • Change to the Driver Tab and Select Roll Back Driver.
  • Press Windows + S, Windows Security, Enter.
  • Select Virus & threat protection You can find the Windows Security sidebar.
  • Select Scan options.
  • Look for the radio button to your right Microsoft Defender Offline scan.
  • Select Scan now.
  • Wait until Windows Defender restarts, then scans for any malicious software.
  • Open a Run box, type services.msc, OK.
  • Check the Hide all Microsoft services Choose from the box Disable all > OK.
  • Press Ctrl + Alt + Esc To open Task Manager.
  • Change to the Startup tab, and disable all non-Microsoft-related processes.
  • Start your computer and see if it starts normally.

Leave a Reply

Your email address will not be published. Required fields are marked *