Windows dump file creation failed error: How can you fix it?

Windows dump file creation failed error: How can you fix it?

Windows automatically dumps all data from a crashed computer into a named folder dump file. . However, what do you do if even the dump files creation fails to work? Let’s look at it.

The dump file is not necessary to diagnose Windows problems. In most cases, the Event Viewer entry will be sufficient to locate the issue. However, the dump file can only provide a more detailed description of the event.

Fix “dump file creation failed” error in windows

What is the purpose of the Windows Dump File and how can it help?

Diagnosing an illness is difficult Blue screen of Death (BSOD). This is what happens when suddenly everything goes wrong. You won’t be able to take an exact snapshot of what the Operating System looked like at the time of the crash.

That’s what the dumpfile does. This file is either a memory snapshot (or memory dump) taken at the time the OS crashed. It contains a log, complete or partial, of all processes that were running in the area.

Although the dump file has many useful features, it is not an easy-to-use source of information. If you’re not a Windows expert or a system administrator, the dump file won’t be of any use.

Is there a way to fix the Windows “Dump File creation Failed” error message?

In the event of a system crash or other catastrophic events, the dump file will be automatically created. This means that there isn’t much that could hinder the process.

  • Corrupted System Files: System file corruption is the most likely cause for “dumpfile creation failed”. We aren’t talking about one virus infecting your computer, but rather widespread corruption of data that has affected the most important files on your computer.
  • Malfunctioning BIOS: Although it is rare, an outdated or unstable BIOS version may also cause problems with the creation of dump files. Sometimes it can be difficult to identify the BIOS version that is causing the problem. It is best to keep your BIOS software current to eliminate this possibility.
  • Cleanup Apps: Users are increasingly using third-party cleaners that promise to speed up Windows. However, these third-party cleanup programs can get too aggressive with their cleaning and may also delete log files or dump data. You can not recover the dump files that were lost, however, These apps can be removed You can avoid this issue from happening in the future.
  • Hardware Faults: An underlying hardware problem could be causing problems. A failing hard drive, RAM issues or RAM failures can cause a dump file to not be written.

Solution 1: Disable Cleanup Software

To fix the problem of “dumpfile creation failed”, uninstall third-party cleaners that may be deleting log files from your computer.

Remove any app from Windows Run its uninstaller to remove it. It is possible to check installed Apps via Settings, if it’s not there or you don’t know its name.

  1. Open Settings Windows 11 and Windows 10 allow you to uninstall or view applications. It can be found in the Start menu under the gear icon.
Fix 1: uninstall cleanup applications
  1. Change to the Apps Click the tab to your left, and then select Installed apps.
Fix 1: uninstall cleanup applications
  1. This list contains all the installed programs on your computer. These are listed alphabetically, by default. You can scroll to entries beginning with C to see if there is a cleaning app. If you can’t remember the name of an app, it is possible to search for that particular app.
Fix 1: uninstall cleanup applications
  1. After you have identified the app that you suspect is responsible, click on the triangle next to it. Then select Uninstall Uninstall Select the drop-down menu. There was nothing similar on our computer so we decided to show it by deinstalling an app that we do not need.
Fix 1: uninstall cleanup applications
  1. This will uninstall the app. You can follow the steps to uninstall the app from your computer. This should resolve your problem.

Resolve 2: File Repairs with DISM and SFC

A cleaning application is not the problem. You need to suspect that corrupted files are what’s causing your problems. The good news? You can resolve this problem with the help of two command prompt utilities.

System File Checker, (SFC), is a useful command which verifies Windows file integrity by checking them against an image of the system. Any corrupt data can be replaced with newer copies. It is possible to rescue an OS that has been corrupted without the need for reinstalling Windows.

Sometimes, your backup system image can become corrupted. That’s where DISM is useful. Deployment Image Servicing and Management(DISM) downloads a copy of your system from Microsoft servers and then uses that to recover your backup.

When SFC and DISM When used together, you will find very few Windows problems that are not fixable. This includes the “dumpfile creation failed” error.

  1. You can repair the system files of your computer using CMD utilities Command Prompt and Run as Administrator. . The app can be found by entering “cmd” into the Start Menu of Windows 11.
Fix 2: repair system files with dism and sfc
  1. A DISM scan will be performed to verify that there are no security holes in the system. Please enter the following comman:

Online Dism /Cleanup – Image /RestoreHealth

Fix 2: repair system files with dism and sfc
  1. The scan will start with a local image. It can also use a Microsoft downloaded image as the base. DISM automatically corrects any errors found in this scan and restores the system image back to its original state.
Fix 2: repair system files with dism and sfc
  1. We can now run an SFC scan, without having to worry about the image of your system. To repair any data corruption in your OS, just enter “sfc” /scanno.
Fix 2: repair system files with dism and sfc
  1. SFC can verify each system file and repair any data that is missing or corrupted. Your Windows installation will then be fully operational after the scan finishes.
Fix 2: repair system files with dism and sfc

Fix 3: Update BIOS

The BIOS can be the next step if you have not solved your problem by repairing the OS or removing any cleanup programs. The installation kits provided by motherboard manufacturers, which flash the chip automatically, make it easy to update the BIOS.

It is risky to update your BIOS as you could lose power and brick your computer. This is why you should only attempt this with an adequate power supply and understanding the potential risks.

Fix 3: update bios

As the procedure of flashing the BIOS varies from one motherboard to the next, there will not be a set process. There will be a way to update your BIOS within Windows. Other systems may require that you prepare a USB drive with all the files. Further information can be found in the BIOS Updates section Check out our article dedicated .

Fix #4: Verify the RAM for Errors

The only remaining task after addressing all software issues is to inspect the hardware. This could refer to the HDD and RAM.

It is simple to check the RAM for errors. There are Multiple methods are available to test the RAM in Windows., You can use the built-in diagnostic tool for memory, or third-party utilities like MemTest86.

Some test memory by not allowing the OS to boot into Windows. Other testers run Windows while the RAM is being tested. For a comprehensive memory check, you should use both of these methods.

  1. We will be using PassMark’s MemTest86 to demonstrate RAM testing. This is a popular memory-checking tool. Download the Free Version of the Software from The official site .
Fix 4: check the ram for errors
  1. MemTest86 can be used to test preboot memory. It must therefore be used from a USB flash drive. This application will guide you through the process of formatting and preparing a flash drive to run this test.
Fix 4: check the ram for errors
  1. The USB flash drive should be plugged into the computer. When your boot options have been set properly, the flash drive will automatically boot, opening the memory tester tool. Start testing your RAM by setting the options according to your preferences.
Fix 4: check the ram for errors
  1. While the UI may be basic, MemTest86 clearly displays progress and scans memory sticks to identify issues. The process can be slow because it performs multiple tests.
Fix 4: check the ram for errors
  1. Once all of your tests have been passed, you’ll receive a summary. Do not worry about writing everything down. You can always save the detailed report for next steps.
Fix 4: check the ram for errors
  1. MemTest86 will generate an HTML report that contains its findings in a user-friendly format. Hit y to confirm.
Fix 4: check the ram for errors
  1. The computer should then start up as normal. On the USB drive, you will see the HTML report that was compiled. This includes a verdict on whether the RAM is working as expected and details about the RAM’s performance.
Fix 4: check the ram for errors

Fix 5: Scanning the Hard Disk to Find Issues

Hard drives are more likely to fail than RAM. This especially applies if the hard drive is an older-fashioned Hard Disk Drive (HDD), with spinning platters, magnetic coatings, and spindles. Sometimes, a storage failure can cause the dump file to not be recorded.

It is easy to check the S.M.A.R.T. status of a modern hard drive and get an exact picture. status. We must use older disks other methods.

  1. A basic overview of S.M.A.R.T. can be obtained by using the command prompt You can check the status of your S.M.A.R.T. by simply using the prompt. Only if the HDD is compatible with this technology, it will work. To test it, you can still open the Command Prompt.
Fix 5: scan the hard disk for issues
  1. Press the Enter key to enter the command Enter:
Fix 5: scan the hard disk for issues
  1. Results are disappointing. The only thing you’ll get is an OK, Pred Fail If the drive is in danger of dying, you can use this tool to warn it. To get more information about the drive’s health, you will need to use an external tool.
  2. CrystalDisk Info This is an excellent free alternative. To get an in-depth analysis of the condition of your hard disk, download the app and launch it.
Fix 5: scan the hard disk for issues

What is the best way to fix “Dump file creation failed” error in Windows?

The most likely reason that you will see a dump file creation failure message is corrupted files in your system. This means that you should first try to fix the OS using DISM/SFC. This command can be used to restore Windows installations without losing any of your data.

Other potential factors include overactive disk cleaner programs. Therefore, it’s worth going through the installed applications and removing any suspicious software.

You can also update your BIOS via software, but it’s not possible to fix your RAM and hard drives using only software. It is up to you only to check that they are in good health and verify everything is functioning properly.

Leave a Reply

Your email address will not be published. Required fields are marked *