Windows 11: How do you enable Secure Boot?

Secure Boot disabling You can unlock some of the most advanced Windows capabilities. Secure Boot is disabled on computers that are not able to install Linux, use non-trusted hardware, or make certain graphics card purchases. You must however (re-)enable Secure Boot in order to upgrade your computer to Windows 11.

Secure Boot can be enabled without any worries if your plan is to do so Install Windows 11 cleanly from a USB flash drive. You can upgrade to Windows 11 with no data loss. . This tutorial will demonstrate how to verify that your computer is in Secure Boot. In addition, this tutorial will show you how to activate Secure Boot on Windows 11.

What’s Secure Boot in Windows?

Secure Boot was developed by several computer manufacturers. This security feature is embedded in the firmware of your computer to protect your device. A hardware component called the Basic Input/Output System, or firmware (or BiOS), is what boots your computer before it runs an operating system. Secure Boot scans your computer for malware and programs not approved by the manufacturer before you turn it on.

Imagine your PC being infected by a bootkit that targets your bootloader, the software that runs Windows. Secure Boot stops the infected bootkit by shutting it down. This ensures that your computer starts with an original bootloader file.

Microsoft created Windows 11 to be compatible with computers that can support Secure Boot in order to provide better security. Although Secure Boot is required by law, some computers do not have this feature disabled as a default. It’s easy to enable Secure Boot.

Check your Windows 11 eligibility using “PC Health Check”

Use the PC Health Check app before you activate Secure Boot. This will confirm that Windows 11 can be run on your PC. It diagnoses the hardware of your computer and alerts you to problems with Secure Boot.

Download the PC Health Check app Choose and Check now In the section “Introducing Windows 11”.

Windows 11 Set Up and the PC Health Check apps will both display an “This PC Must Support Secure Boot” error, if Secure Boot is not enabled on your computer. Below are step-by–step instructions to verify your Secure Boot status.

Trusted Platform Module Version 2.0 (TPM 2.0), is an additional security setting that you need to enable in order for Windows 11 to work. Your computer may not meet the requirements of the TPM system if the PC Health Check App displays any other processor-related errors. Allow TPM to be enabled in the BIOS settings of your computer Try installing Windows 11 once more.

Windows Secure Boot Status: How can you check it?

You can verify your Secure Boot status using the Microsoft System Information Tool.

1. Press Windows key + R, msinfo32 Select the option you want to use in the dialogue box OK.

2. Select System Summary On the sidebar locate the “BIOS Mode” on the right-hand side of your window and make sure it is visible UEFI.

3. Scroll through the following list to locate Secure Boot State.

You can find it in “Secure Boot State” but not elsewhere Ctrl + F, secure boot Use the search box to find and then press Enter.

Secure Boot will be disabled on your computer if the value of “Off” is set to 0. Continue to the next section for instructions on how to activate Secure Boot. After that, you can now upgrade to Windows 11 by enabling Secure Boot.

Note: You can switch from Legacy BIOS to UEFI (Unified Extensible Firmware Interface) if your computer uses Legacy BIOS. You can switch between Legacy BIOS or UEFI using the MBR2GPT tool (Master Boot Record to GUID Table Partition Table). This is done without having to reinstall Windows. See this Change Windows 10 BIOS from UEFI to Windows 10 See the following instructions for more details.

Windows Secure Boot: How do you enable it?

Here’s how you can turn Secure Boot back on if your computer is not responding to the request.

1. Open your computer’s Settings, go to > Updates & Security > Recovery, Restart Now.

2. Wait for your PC to Boot into the system Recovery Menu . Troubleshoot Continue readin.

3. Choose Advanced options Continue to the next page.

4. Select UEFI Firmware Settings.

Note: You won’t see “UEFI Firmware Setting” on this page if your motherboard does not have a TPM Chip. This means that your computer cannot run Windows 11.

5. Select the Restart button.

Wait until your computer boots the BIOS configuration utility. The BIOS settings page’s interface may vary depending upon the manufacturer or model of your computer.

6. Navigate to the “Security,” “Authentication” or “Boot” section. You will find the Secure Boot Mode or Secure Boot Option and make sure it is “Enabled.”

You can navigate to any site if the keyboard is disabled by using the arrow keys Secure Boot Use the press Enter. Enabled Use the press Enter again.

7. Click here Exit Tab and Select Exit Saving Changes. Yes Press conference and confirmation Enter.

You can then reboot your computer and upgrade to Windows 11 by waiting for it to restart. The System Information tool can be used to verify that the Secure Boot state of your computer is on.

Are you unable to enable Secure Boot Here are some steps to get you started

If your computer doesn’t let you enable Secure Boot, Reset the BIOS back to its default setting, You can reset your computer (without having to delete files) Secure Boot should be enabled again. If the above troubleshooting fails, please contact your manufacturer.