Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
A loose or broken USB cable, power loss, hardware damage, and power outages can all cause Fire TV devices to not turn on. You can use this tutorial to learn how you can Troubleshoot Fire TV Sticks that aren’t turning on.
It is hard to reboot the streaming stick This might resolve the issue. After a 1-3 minute delay, unplug the Fire TV Stick’s power supply and then plug it in again. If your wall outlet is equipped with a power switch make sure it’s turned on. You should also change the batteries in your Fire Stick remote.
If your Amazon Fire TV Stick is still not turning on, you can try the following troubleshooting tips.
1. Get authentic Fire TV Stick Accessories
A power adapter that can supply power to your Amazon Fire TV Stick must have a rating of at least five volts (5V), and at most one amp (1A). A USB adapter not meeting the required power supply rating may cause your streaming device to stop working. A counterfeit USB cable, or power cord could cause the Fire TV Stick to not turn on.
Your TV may not provide enough power to run your Firestick. You can instead plug your Fire TV stick directly into the wall using the USB cable included with the package. Make sure that the USB cable does not slip into the power adapter’s socket.
You can purchase genuine Amazon-branded replacements for your Firestick’s cable and power adapter from Amazon’s website or store. To power the Fire TV Stick, you can use an adapter or cable from a third party. Make sure the USB adapter has a minimum power rating of 5V/1A.
2. Make sure your HDMI cable is connected to the TV
If the HDMI cable is not tightened, your TV might fail to recognize it. Make sure your Fire TV Stick is plugged into the HDMI port of your TV.
Double-check to make sure your HDMI input channel is correctly set on your TV. Make sure your Fire TV Stick is plugged into HDMI 1 to ensure that the HDMI input channel is HDMI 1. If the problem persists, switch your Fire TV Stick into another HDMI port.
Your Also, the Fire TV might not be able to show visuals Check if the HDMI port on your TV is not working. Then plug your Firestick in to a power outlet. Connect it to another TV. It is possible that the HDMI ports from the older TV have been damaged.
The Firestick can be connected through an HDMI splitter or hub. If this is the case, you should plug it directly into the HDMI port of your TV. If your TV isn’t detecting any HDMI devices, contact your TV manufacturer.
3. Cool Your Fire TV Stick
Your The screen may become black and firestick could get stuck It may stop responding if the temperature is too high. The Fire TV Stick can heat up if it’s too close to your television or other heat-emitting gadgets. The power adapter can be unplugged if your Fire TV Stick becomes unusually hot. Allow it to cool off for at least a couple of minutes.
An HDMI adapter is a way to prevent your Firestick from heating up constantly. An HDMI adapter allows you to extend the streaming stick’s reach away from your TV, and decreases heat exposure.
All Fire TV Stick models come with an HDMI adapter. You can purchase an Amazon-branded substitute from Amazon’s site if you are unable to locate the extender.
4. Restart Your TV or Factory Reset It
If your Firestick device is still not turning on, or displays blank screens, restart your TV. If the problem persists, reset your TV’s factory settings. For instructions on how to set your TV to factory default, refer to the instruction manual.
Ask for technical assistance
If your Fire TV Stick isn’t connected, it won’t power on Port charges are not mandatory, Amazon Device Support These troubleshooting tips will help you if your Firestick doesn’t work.
