13 ways to fix Windows 11 not connecting to Wi-Fi

Do you have problems connecting to Wi Fi networks on your Windows 11 laptop? Does the problem affect all networks? Let us explain the reasons why this happens, and how to fix it.

Windows 11 can’t connect to WiFi because of many factors, including complex and trivial. An incorrect password, an issue with the router, or a corrupted network configuration could all be reasons why Windows 11 is not connecting to Wi-Fi. To fix Windows 11, if it is not connecting to Wi-Fi, follow the troubleshooting steps.

Check out this article if you haven’t yet upgraded to Microsoft’s new operating system Windows 10 Wi-Fi troubleshooting guide instead.

1. You can check your Wi-Fi password

When connecting to Wi-Fi networks for the first time, ensure that your password is correct. A single error or misalignment of upper and lowercase characters will stop your computer from connecting to the Wi-Fi network.

2. Manually connect to the network

Windows 11 automatically connects to pre-saved wireless networks, but you shouldn’t count on it happening every time. Try connecting manually if your computer isn’t connecting even though it is in the vicinity of a wireless network.

1. Click the Quick Settings button and select the Battery,, Volume, Network The taskbar icon is located in the lower right corner. Click to expand Wi-Fi category.
2. Pick the Wi Fi network to which you would like to connect.
3. Select Connect. . If the password has not been updated since your last login, you’ll need to change it.

While you’re at it, make sure to check out Connect automatically Box to activate the network, if not already.

3. Toggle Airplane Mode On/Off

Toggling Airplane Mode Your PC’s WiFi adapter will be rebooted periodically. This also resolves any minor issues that may prevent Windows 11 from connecting with a network.

Open the Quick Settings panel again, and then select the option Airplane mode tile. Next, leave it for approximately 10 seconds before selecting it again.

4. Get closer to the Router

A weak signal may prevent you computer from joining any wireless network, even though it is on Windows 11’s Wi-Fi network listing. When the signal indicator is full, get closer to the access point or router. After that you can connect to it once again.

Learn how to fix a problem on your home network if it occurs Increase the Wi Fi signal strength For better connectivit.

5. Restart Your Computer

The RAM (random-access memory) is cleared of temporary information and wireless connectivity problems that may arise in Windows 11. Open the program, save your data and open it again Start menu Choose and Power >> Restart.

6. Run the Network Troubleshooter

Windows 11 includes a number of network troubleshooters built in that detect and repair persistent internet connectivity issues. You can use them here:

1. Right-click the Start button Choose and Settings.

2. Scroll down to see the System Screen and choose Troubleshoot.

3. Select Other troubleshooters.

4. Select Run The next is theInternet Connections and Network Adapter You can find troubleshooters further down this list.

Find out what you should do if your Internet Connections troubleshooter or Network Adapter malfunctions An error occurred when Wi-Fi didn’t have a valid IP setup.

7. Don’t forget to reconnect with the Network

You can also fix Wi Fi connectivity issues that are specific to one network, provided you haven’t previously joined it. You can do this by following these steps:

1. Choose from Open Settings or selectNetwork & internet > Wi-Fi To visit the Wi-Fi settings page of your computer.

2. Select Manage known networks.

3. Select Forget The network name is next to it.

4. You can restart your computer.
5. Go to Quick Settings > Wi-Fi Rejoin the network connectio.

8. Make sure you check the MAC Address Filtering

Wi-Fi networks have the ability to ban devices from joining their network based upon unique identifiers known as Addresses for Media Access Control (MAC) . Permissions for accessing the router settings.

1. Open Settings Click here to go there Network & internet > Wi-Fi > Hardware properties. Physical address (MAC).

2. Use a browser to open a website and access your router’s control panels.

3. You should look for MAC Filter option under Security. Filtering mode It is scheduled to Allow, Deny, Delete the MAC address and add it to the end of the list.

9. You can restart, update, or reset your router

Try restarting your router, modem or access point if the problem continues. If this does not work, check the router settings to install any firmware updates. You will not receive any new updates if there is none, reset your wireless router Or contact your ISP (internet services provider).

10. Install, roll back, or update the Wi-Fi adapter driver drivers

Windows 11 computers that refuse to connect with multiple networks may have corrupted, obsolete, or buggy network adapter driver drivers. These drivers can be updated, rolled back, or reinstalled.

Drivers Updated for the Network Adapter

Bug fixes are available in newer network adapter drivers to fix intermittent Wi-Fi connectivity problems. Install them her:

1. Right-click the Start button and select Device Manager.
2. Expand Network adapters.
3. Pay attention to the name of the network adapter, e.g, Intel(R) Wi-Fi 6 AX201 16oMHz.

4. You can visit the website of the manufacturer of network adapters, e.g, Intel Download the latest driver. You can download and save the drivers from another computer or Mac if your computer is unable to connect to Wi-Fi networks.

5. To update drivers, run the setup file. You can also right-click on the network adapter in Device Manager and choose Update driver > Browse my computer for drivers, Select the driver file that you have downloaded.

Drivers for Rollback Network Adapters

You can roll back an adapter drivers to fix problems that occurred after you have installed a newer version of the network adapter. You can do this by following these steps:

1. Right-click the Start button and select Device Manager.
2. Expand Network adapters.
3. Click the right click on the adapter wireless and choose Properties.

4. Change to the Driver Tab and Select Roll Back Driver.

5. Mark the radio button to your right Previous version of the driver performed better/seemed more reliable Choose and Yes.

6. You can restart your computer.

Reinstall Network Adapter Drivers

To eliminate corruption problems, you will need to reinstall the network adapter drivers. This is how to do it:

1. Right-click the Start button and select Device Manager.
2. Expand Network adapters.
3. Select the appropriate option by right-clicking on the network adapter Uninstall device.

4. Make sure to check the box beside Attempt to remove the driver for this device Choose and Uninstall again.

5. Windows will automatically install the network drivers when you restart your computer. For confirmation, click on the Device Manager right-click Network adapters, Scan for hardware changes.

11. Windows Update to the Latest Version

Another way to resolve Wi-Fi problems is to update Windows 11 to the most recent version. You can either connect to another Wi-Fi network, or use an Ethernet cable:

1. Select the Settings option from your phone Windows Update You can find the sidebar.
2. Select Check for updates.
3. Select Download and Install.

If not, Verify your Windows version You can download the latest version via the Microsoft Update Catalog Copy the update file to another computer. Copy the file to another computer You can do the update offline.

12. Reset TCP/IP Stack

A broken TCP/IP stack (Transmission Control Protocol/Internet Protocol). Windows can often cause connectivity problems. This is why you need to restore Windows to default settings.

1. Open the Start menu, cmd, Run as administrator.

2. Press the Enter key to enter the command Enter: :

ipconfig /flushdns

3. You will need to execute the commands one after the next:

netsh winsock reset catalog

netsh int ip reset

4. Close the Command Prompt.
5. You can restart your computer.

13. Reset Windows 11 Network Settings

If you are unable to resolve the problem with any of these fixes, then it is time for you to do a Total network settings are reset in Windows 11,. . All passwords and Wi-Fi networks you have saved will disappear during this procedure.

1. Select the Settings option from your phone Network and internet.
2. Select Advanced network settings.

3. Select Network reset.

4. Select Reset now.

Try connecting to another Wi-Fi network after you have reset your network settings. Wi-Fi problems should be resolved if the issue was caused by an incompatible or corrupted network configuration.

What is the difference between Wi-Fi and Internet connectivity?

However, connecting to Wi-Fi doesn’t automatically mean your Windows 11 computer will be able to access the internet. Continue to see the following: Globe Click the icon in the upper right corner of your taskbar to learn how to repair a computer It connects to WiFi, but it can’t connect the internet.