13 Solutions for Windows 11 Wi Fi Not Working

Wi-Fi Modern computers are dependent on Wi-Fi for their survival. However, sometimes Windows 11 (or Windows 10!) doesn’t offer the ability to connect to Wi Fi. Without a cable, it is impossible to access the internet and LAN resources.

These are the top tips for fixing Wi-Fi issues and getting you back on the internet in no time. Let’s start with the universally useful tip.

1. Reboot your PC

You can just reboot your computer. Many times, wireless network strangeness disappears after rebooting.

2. Is Airplane Mode On?

Windows 11 comes with an Airplane (or “flight”) mode which disables all radio-transmission devices. It includes Bluetooth and Wi Fi, so be sure to check that the Airplane setting has not been accidentally turned on.

You have the option to press Windows + A Click on it with your left click speaker Please use the area for notification.

The Flight mode button The LED should not blink. It should not be lit up. Click on or tap the button once.

3. Run the Network Troubleshooter

Windows 11 includes a range of troubleshooters inbuilt that can automatically identify and correct common issues, without the need for you to use the internet Command Prompt. . The Network Troubleshooter can be used in the following way:

1. Open the Start Menu.
2. Select the Settings Cog To open Settings.

3. Open System.
4. Open Troubleshoot.

5. Next select Other Troubleshooters.

6. Select Run Next to Internet Connections.

Choose the appropriate option troubleshoot your internet connection Follow the instructions on screen.

The program will inform you of all issues found and suggest ways to fix them.

4. You can boot into Safe Mode or use Ethernet

You may need an internet connection for some troubleshooting tasks. Or, you might just want to connect now so that the Wi-Fi can be fixed later. This can be done in two different ways.

The first is to boot Windows 11 into Safe Mode. In this mode, no third-party programs are installed at startup. Windows instead uses a generic driver for network adapters. Safe Mode will cause your Wi-Fi to stop working. In this case, you might need to install drivers. Visit www How to start Windows 11 Safely For more information, please contact us.

You can also switch to Ethernet connections. You can run an Ethernet cable to the closest outlet for your Windows 11 laptop.

5. Make sure Wi-Fi is enabled

Do you have Wi-Fi turned on at all? You have a few options to turn it off. You can first select the Quick Settings button from the Notification Area in Windows 11. The Wi-Fi toggle switch will be revealed in Windows. It will turn on the Wi-Fi toggle switch in Windows.

You’ll find a hardware switch either on the laptop’s side or a shortcut keyboard for Wi-Fi functionality if you use it as a laptop. Windows won’t be able to use Wi-Fi hardware if the BIOS disables it.

For the exact location of the button, you will need to refer to your manual. You can usually use the keyboard Wi-Fi toggles by pressing and holding the Fn key Then, press the key that has a Wi Fi icon on it and continue pressing the appropriate key.

6. Make sure your Wi-Fi connection is active

Windows 11 may have disabled your Wi-Fi connection. This article will show you how to fix it:

1. Open the Start Menu With the Windows ke.
2. Type Control Panel Press the Enter key Enter.

3. Go to Network and Internet >> Network and Sharing Center.

4. Select Change adapter settings.

This page will show you all your connected modems and network connections.

To find the appropriate network adapter look for a Wi Fi link. Most systems will have only one. You can select the one that is grayed and marked “Disabled” by right-clicking on it Enable.

7. Verify that your Wi-Fi adapter is properly plugged in

You should make sure that your USB-based WiFi adapter (which is most likely for desktop systems) is correctly plugged in.

To make sure it works, you might also try the program on another computer. You might also try a different USB port. If the port is not working properly, you can try another USB port.

8. You can check the status of your Network Adapter using Device Manager

Device Manager displays a complete list of hardware on your computer, along with information about whether or not they are working correctly.

1. Open the Start Menu.
2. Type Device Manager.
3. Open Device Manager You can find the results of your search.

Double-clicking the computer category may be necessary to expand it.

Look for network adapters in the search results. Expand that section to see all network adapters.

In the list of network adapters, look for your Wi Fi adapter and verify that it displays a warning icon such as a yellow exclamation point. You can right-click the adapter, and then check its properties to see specific error messages.

The device manager may not recognize the adapter if it is absent completely. This indicates that there is a hardware issue. It could be software-related if the adapter only works in Safe Mode.

Right-click the icon of an adapter with a red cross in it to select Enable. . If this is not possible you can remove devices by right-clicking and selecting Uninstall. Reboot your computer and the hardware will be detected again.

9. You can rollback, update or reinstall your Wi-Fi driver

Most likely, the problem is with your hardware driver. Either download the most recent driver from manufacturer’s site, install it using driver rollback under adapter properties, uninstall the driver and then reinstall either the previous version, or the newer version.

10. The “Reset Network” Function is available

Resetting Windows or reinstalling Windows can solve many problems. However, this is not the best solution for minor issues like a slow Wi-Fi connection. You can always reset your computer only The network setting:

1. Open the Start Menu.
2. Select the Settings Cog Click here to access the Settings app.
3. Choose Network and Internet.
4. Now choose Advanced network settings.

5. Finally, choose Network reset Click here to continue reset now.

You will need to reset your adapter and network settings. To confirm that the reset was effective, restart your computer. You may have special network configurations such as an a VPN connection, You’ll need to manually set up the proxy server or your custom DNS settings again.

11. A Specific Wi-Fi Network isn’t Working

This article may have been found by you when you searched for reasons that a particular Wi-Fi feature isn’t working. Resetting your router and computer is the best solution.

Logging in to router’s settings pages will allow you to verify that broadcast SSID is turned on. This will ensure that your network is visible.

You can forget about it if the network shows up but it’s not connecting to you:

1. Open the Start Menu.
2. Select the Settings Cog.
3. Choose Network & Internet, Wi-Fi.

4. Select Manage known networks.

5. Select the Wi-Fi network you prefer, then select Forget.

The password will need to be re-entered for network. However, in most cases, network settings can become corrupted, or have been changed. For these situations, it is possible to forget the network and solve the problem.

12. Windows Update

Microsoft updates Windows 11 regularly with bug fixes and performance improvements, as well as new features. There are many computers in the world, so it is inevitable that some computers will experience problems as a result of a Windows Update.

You can check the Internet to find other WiFi problems that have occurred after you installed a new update. You can check the following links if it seems like your problem may be related to an upgrade How to uninstall Windows updates and reinstall them . . Next, uninstall the update.

13. Allow the Wi Fi Icon to be enabled in the Group Policy editor

Windows 11 Pro might have changed the setting that causes your Wi Fi icon to disappear. It’s important to contact the IT department if your computer is managed by someone within your company. You can also ask your IT department to address the Wi-Fi issues if they have it!

1. Press Windows + R Click here to access the Run dialog box.
2. Type gpedit.msc Use the press Enter.

3. In the Group Policy Editor, User Configuration.
4. Now select Administrative Templates -> Start Menu and Taskbar.
5. Look for Remove the networking icon It can be opened.

6. Select Disabled If the window isn’t currently disabled, you can disable it by clicking the link in the upper left corner.

7. Select OK and restart your computer.

This Policy may already be disabled. If so, close the Editor and find a new solution.

There are no more worries about your wireless network.

These are just a few of the many fixes that you can do, however you will still need to have a functioning Wi-Fi connection unless there is something truly strange. Check out these tips to make your Wi-Fi connection more reliable Here are 10 ways to boost a weak WiFi signal.